Footfitter Two-way Shoe Stretcher

FootFitter Premium Professional Single Shoe Stretcher 2-WAY Deluxe stretches both the length and the width of your shoe overnight. The FootFitter Premium Professional Shoe Stretcher is made from beech wood that is smooth and polished and the mechanics are constructed in Stainless Steel with a Nickel Plated Finish. The FootFitter Premium Professional Shoe Stretcher includes three bunion and corn plugs that differ in size to relieve pressure and pain. The FootFitter Premium Professional Shoe Stretcher works in both the right shoe and the left shoe, one at a time. The FootFitter Premium Professional Single Shoe Stretcher 2-WAY Deluxe comes with ONE (1) stretcher and this stretcher will stretch both the width and the length of your shoe.

This Shoe Stretcher contain No Plastic Parts

A free 4 oz. Bottle of Angelus Professional Shoe Stretch is Included in each Shoe Stretcher Kit!

Additional bottles of Angelus Professional Shoe Stretch are available for purchase.

Directions to use FootFitter Premium Professional Single Shoe Stretcher 2-WAY Deluxe. Please click on the link below.

FOOT FITTER TWO-WAY SHOE STRETCHER

INSTRUCTIONS

DIRECTIONS FOR USE: Using the FOOT FITTER 2-Way (shoe stretcher), your shoe can be stretched at all pressure points. In addition, your shoe length can be stretched to a certain extent. Due to its straight design, the stretcher can be used on the left or right shoe to stretch both width and length.

A.toe section with holes
B.back section
C.large silver round structured wheel (turn counterclockwise to extend stretcher in length)
D.black handle (turn clockwise to spread the stretcher out)
E.corn pieces (different sizes can be fitted into the holes of the toe section(A))

Step 1:

Before using the FOOT FITTER we strongly recommend treating the shoe with a shoe stretch spray or dampen it with water or steam to soften the leather in the areas you intend to stretch.

Step 2:

The toe section (A) of the stretcher is fitted with various holes. One of the movable corn pieces (E), which differ in size, is fitted into one of the holes, exactly where the pressure point is located. If there are several pressure points, several movable corn pieces (E) can be used during one stretching process.

Step 3:

Before carefully inserting the FOOT FITTER (shoe stretcher) into the shoe, it is advisable to turn the large silver round structured wheel (C) clockwise so that the back section (B) of the stretcher will be as near to the front section(A)as possible.

NOTE:
Make sure that the front section (A) of the FOOT FITTER is not spread out, by turning the black handle (D) counterclockwise.

Step 3;

Insert the FOOT FITTER carefully into the shoe. Turn the large silver round structured wheel (C) counterclockwise and the back part (B) of the stretcher will be gradually moving towards the heel of your shoe. By doing this, a certain resistance will soon be reached and the shoe will be stretched in length.

NOTE:
Do not overstretch! Excessive stretching causes damage to the material of your shoe.

Step 4:

Once the desired length is reached, the black handle (D) can be turned clockwise. The stretcher will then slowly widen the shoe.

Step 5:

The FOOT FITTER (shoe stretcher) should remain in the shoe for at least 6-8 hours.

To remove FOOT FITTER (shoe stretcher) turn the large silver round structured wheel (C) clockwise and the black handle(D)counterclockwise.

ATTENTION: Misuse of the FOOT FITTER or excessive stretching of the material can cause permanent damage to the shoe.

The customer bears all risks relating to the performance of the merchandise and damage to the shoe.